基于间接示功图测量的电潜柱塞泵故障诊断研究与应用

在分析电潜柱塞泵工作原理的基础上,结合柱塞式抽油泵的结构,建立了机组运行的理论示功图,对其进行了深入分析。以功率信号作为故障信息,提出一种基于间接示功图测量的电潜柱塞泵故障诊断方法,并描述了小波去噪方法绘制实测示功图的主要过程。针对机组典型故障,在室内模拟平台和现场油井上对该方法的准确性进行了验证实验与分析。测试结果表明:故障诊断效果较好。     

A new method to improve the stability,tensile strength,and heat resistant properties of shape‐memory epoxy resins: Two‐stages curing

In this article, we design a new thermal curing method: two‐stage curing. The purpose of using this approach is to maintain the excellent shape‐memory property of epoxy resin system after first stage curing, and the material can be folded in small size to storage or transportation and recovery its original shape commodiously by heating temperature. Then, after second stage curing, the stability, glass transition temperature(T_g), and tensile strength of material can be improved effectively. For this aim, a series of mixtures have been prepared. Differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), tensile test, scanning electron microscope (SEM), dynamic mechanical analysis (DMA), and fold‐deploy shape‐memory test have been used to characterize the feasibility of two‐stage curing process, curing degree, tensile strength, morphology, thermodynamic properties, and shape‐memory performance of these polymers. DSC results show that two independent curing stages can be achieved successfully. Tensile tests and DMA results suggest that tensile strength and heat resistance have been improved after the second curing stage. SEM results reveal that the addition of latent curing agent do not change the fracture mechanism. Furthermore, the fold‐deploy shape‐memory tests prove that the composites after first stage curing possess eximious shape‐memory property. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39882.     

Effect of diisocyanate on pyridine containing shape memory polyurethanes based on N,N‐bis(2‐hydroxylethyl)isonicotinamide

This article demonstrates a comparative investigation about the effect of diisocyanate on pyridine containing shape memory polyurethanes (Py‐SMPUs), which are synthesized with N,N‐bis(2‐hydroxylethyl)isonicotinamide (BINA) and four different diisocyanates: 1,6‐hexanediisocyante (HDI), isophorone diisocyanate (IPDI), methylene diphenyl diisocyanate (MDI), and tolylene diisocyanate (TDI). Results show that all BINA–SMPU systems have amorphous reversible phase. Comparatively, the MDI–BINA and TDI–BINA systems show higher T_g; and the HDI–BINA and IPDI–BINA systems show better thermal stability. In addition, the HDI–BINA and the IPDI–BINA systems exhibit good thermal‐induced shape memory effect and good moisture‐sensitive shape memory effect due to their better moisture absorption properties. Particularly, the HDI–BINA system has better response speed and better shape recovery. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40721.     

Toughening‐modified epoxy‐amine system: Cure kinetics,mechanical behavior,and shape memory performances

Shape memory epoxy resins are derived on reacting E51 with triethylenetetramine in presence of the toughening agent polypropylene glycol diglycidyl ether (PPGDGE). The curing behaviors are studied with differential scanning calorimetry. The toughening system shows a decrease in activation energy. ?esták–Berggren model is utilized to establish the kinetic equations. The fitting results prove that the equations can well describe the reactions. Tensile tests and dynamic mechanical analysis are used to analyze mechanical performances and thermodynamics. Shape memory properties are characterized by fold‐deploy tests. The elongation at break increases as the concentration of PPGDGE increases. The toughening materials have lower glass transition temperature (T_g). The fixable ratios of all systems are greater than 99.5%. The shape recovery time decreases with increasing the PPGDGE concentration. The optimal system can fully recover its original shape in about 2 min at T_g + 30°C, and exhibit the maximum fold‐deploy cycles as 13 cycles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40853.     

荧光指示剂吸附法测量柴油馏分芳烃含量

应用液体石油产品(汽、煤油)中的芳烃标准分析试验方法——荧光指示剂吸附法测量柴油馏分烃类族组成,考察了硅胶,洗脱剂以及空气压力对实验结果的影响,对分析条件进行优化,确保分析的重复性和准确性。     

基于有限元和PSO-BP法的20辊轧机轧制板形预测

针对20辊轧机轧制板形受到多重因素影响、难以精确预测的问题,基于有限元和PSO-BP法,建立20辊轧机轧制板形质量预测模型。根据20辊轧机轧辊间的位置关系,基于有限元软件ANSYS/LS-DYNA,考虑轧辊弹性变形、板带塑性变形与摩擦等因素,建立20辊轧机辊系有限元模型,分析板宽、厚度、张力、速度等因素对板形指数的影响;综合考虑不同轧制板形影响因素,以板形指数作为板形质量衡量指标,基于BP神经网络建立轧制板形质量预测模型,采用粒子群算法优化BP神经网络板形质量预测模型的权值和阈值,提高板形预测精度。     

桩承式路堤土拱数值模拟中路堤土本构模型的选择

数值模拟方法已成为研究桩承式路堤中土拱最重要的手段,其关键在于路堤填土要采用合理的本构模型。建立桩承式路堤平面土拱分析的弹塑性有限元模型,考虑摩尔-库伦模型（MC）、硬化土模型（HS）和小应变硬化土模型（HSS）3种不同的路堤土本构模型,用有限元方法模拟不同路堤土本构模型下桩承式路堤中的土拱形态和土拱效应。计算结果表明：3种不同路堤土本构模型下平面土拱的形态都是半个椭圆。路堤土采用HS和HSS模型,获得的土拱形态、效应和桩帽-土差异沉降相同。较之HS和HSS模型,路堤土采用MC模型时计算得到的桩帽-土差异沉降较小,桩帽荷载分担比略大。当路堤高度较小时,采用MC模型获得的土拱远小于HS和HSS模型下的计算结果。土拱效应的数值模拟中路堤土可采用简单的MC模型,但土拱形态的数值模拟中路堤土宜采用HS模型。     

PAN法络合滴定测定硝酸铜含量

三水硝酸铜测定的化工行业标准采用以紫脲酸铵作指示剂的EDTA络合滴定法,该方法快速、简单,但终点不易判断,准确度和精密度不高。对该方法进行了改进,以PAN代替紫脲酸铵为指示剂。结果表明,与紫脲酸铵法相比,PAN法具有终点易判断、准确度和精密度高、重现性和再现性好等优点,值得推广应用。     

基于超弹性形状记忆合金的钢结构抗震研究进展

提高城市强震后恢复韧力(resilience)是新一代结构抗震研究的重点,而结构自复位则是实现功能可恢复的主要方式之一。随着材料科学的发展,形状记忆合金(SMA)在高性能结构设计中得到应用。以钢结构被动抗震领域为对象,从SMA基本元件、构件、结构体系三个层面进行阐述,对最新研究进展、机遇与挑战进行分析与总结。元件层面,对SMA丝材、棒材、绞线、螺旋弹簧、碟形弹簧和环形弹簧的基本特性和应用潜力进行了阐述,分析其承载力、变形、自复位及耗能能力等;构件层面,总结了SMA阻尼器、支撑、梁柱节点以及隔震装置的构造形式、工作机理与力学性态;在此基础上,分析了SMA支撑钢框架与SMA节点钢框架的体系构造、动力响应规律、耗能机制、自复位机制和变形协调特征,以及目前研究存在的不足,以期为SMA在结构抗震领域进一步的实际应用提供参考。     

基于NURBS算法的工业机器人轨迹规划研究

轨迹规划是工业机器人研究领域的重要内容之一。为解决使用直线与圆弧逼近不规则曲线方法带来较大误差的问题,提出使用NURBS拟合自由曲线,并使用S形速度曲线来控制机器人末端的运动速度和加速度,使各个插补点的位置、速度和加速度能够连续,将之反推到关节空间可以得到各个关节的角度、角速度和角加速度。最后以IRB2600工业机器人为仿真本体,通过MATLAB仿真证明:NURBS和S形速度曲线相结合的方法可以得到在关节空间连续、平稳的运行轨迹、速度曲线、加速度曲线,减弱了因各关节角度、角速度、角加速度突变带来的冲击影响,优化了机器人运行轨迹。